The short answer
A professionally installed epoxy floor in the Fort Worth area typically runs $4 to $10 per square foot. For a standard two-car garage, that puts the total between $1,600 and $5,800, depending on the condition of the slab and the finish you choose. The low end of that range is a solid color system over concrete in good shape; the high end is a full metallic pour or a slab that needs real repair before coating.
2026 cost table
| Item | Typical range |
|---|---|
| Professional install, all in | $4 to $10 per sq ft |
| Two-car garage, total project | $1,600 to $5,800 |
| Materials share | $1 to $5 per sq ft |
| Labor share | $3 to $5 per sq ft |
| Concrete repair, if needed | $3 to $7 per sq ft |
Every serious quote starts with someone looking at your actual slab. These ranges are what most Fort Worth projects land in, but cracks, moisture, and finish choice are what set your exact number.
What moves the price
- Floor condition and cracks. A clean, sound slab coats fast. Cracks, spalling, and old coatings mean grinding, patching, and repair time before any epoxy goes down, and concrete repair alone runs $3 to $7 per square foot.
- Moisture in the slab. Concrete that reads high on a moisture test needs a vapor barrier primer. Skipping that step is why cheap coatings bubble and peel.
- Finish tier. Solid color is the most affordable, flake sits in the middle and hides dust and small flaws, and metallic is the premium marbled look at the top of the range.
- Edges and coves. Coating up the stem walls or adding a cove base along the edges adds detail work, and detail work is labor.
- Garage size. Bigger floors cost more in total but usually less per square foot, since setup and travel are spread over more area.
Cure timeline
Plan on light foot traffic in 16 to 24 hours, and 2 to 7 days before parking a vehicle on the new floor. Your installer will confirm exact times based on the products used and the slab temperature that week.
How long the floor lasts
A professionally installed solid epoxy floor typically lasts 10 to 20 years in a residential garage. That lifespan is earned in the prep stage: diamond grinding opens the concrete so the epoxy bonds mechanically, and moisture testing catches slabs that need a vapor barrier first. That is also the honest case against DIY kits. The kit itself looks cheap upfront, but rolled over unprepped concrete it tends to peel within a couple of years, and at that point you are paying to strip a failed coating before paying for the floor you should have bought the first time.
A worked example: two-car garage
Say you have a 440 square foot two-car garage with concrete in decent shape and you want a flake finish. At a mid-range $6 per square foot, the project comes to about $2,640: roughly $1,100 of that is materials at $2.50 per square foot, and about $1,540 is labor at $3.50 per square foot for the grinding, prep, and two coating days. If the inspection turns up a few feet of cracking that needs repair at $5 per square foot, you might add a couple hundred dollars, still landing comfortably inside the typical $1,600 to $5,800 range for a two-car garage.
Quick questions
Is a Texas summer a bad time to coat a floor?
Can epoxy go over cracks?
Gloss or matte?
See it in your color, then get your number.
Try all 12 gloss colors on a real floor in the visualizer on our homepage, then tell us about your garage. Free written estimates, in English or Spanish.